iglidur® J | The versatile endurance runner - Over 250 dimensions available from stock
- Low wear many different shaft materials
- Low coefficients of friction in dry operation
- Vibration dampening
- Good chemical resistance
- Best material to use with low-cost soft shaft materials
- Low moisture absorption
One main advantage of iglidur® J plain bearings is the combination of a low coefficient of friction in dry operation and the low stick-slip tendency. With a maximum recommended surface pressure of 35 MPa, iglidur® J plain bearings are not suitable for extreme loads.
Typical application areas
Vending machineryPrinting industryBeverage industryAviationCleanroom You can find further applications here:
Industry solutions When to use it?- For high speeds
- For highest wear resistance at low to medium pressures
- Low wear against different shafts
- When a low coefficient of friction in dry operation is required
- Vibration dampening
- When good chemical resistance is required
- Best performance with low-cost soft shaft materials
- Low moisture absorption
| When not to use it?- When high pressure loads occur
iglidur® G, sleeve bearing, mm iglidur® W360, sleeve bearing, mm - When short-term temperatures occur that are higher than +120 °C
iglidur® G, sleeve bearing, mm iglidur® Z, sleeve bearing, mm - When a cost-effective bearing for occasional movements is necessary
iglidur® G, sleeve bearing, mm
|
Use our filter options to find the suitable product Tolerances and measurement systemThe installation dimensions and tolerances of iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods Assemblyiglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting in the correctly toleranced housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are prevented this way.
iglidur® - assembling, gluing, machining
Certificates and standards