iglidur® J350 | Endurance runner with high dimensional stability at high temperatures - Can be used with many different shafts and loads - Excellent coefficient of friction against steel
- Continuous service temperature up to +180 °C
- For medium to high loads
- Particularly well-suited to rotating movements
- Lubrication- and maintenance-free
- Standard range from stock
An outstanding bearing for rotating applications – and for a wide range of different shaft materials: With iglidur® J350 bearings with flange, the service life can often be increased for applications between 2 and 50 MPa. In addition, the high temperature resistance makes it a very versatile material.
Typical application areas
Vending machineryAutomotiveGlass industryMachine tools You can find further applications here:
Industry solutions When to use it?- If a high wear-resistant bearing for rotating movement at medium and high loads is required
- If an economical bearing is required for use at high temperatures
- If press-fit up to +150 °C is necessary
- If high wear resistance is required at high loads
- If the bearing is exposed to shock loads
| When not to use it?- If permanent temperatures exceed +180°C
iglidur® X, sleeve bearing with flange, mm - If low friction is required
iglidur® J, sleeve bearing with flange, mm - When a cost-effective bearing with a low coefficienct of friction is needed
iglidur® D, sleeve bearing with flange, mm iglidur® R, sleeve bearing with flange, mm - With fast rotational speeds
iglidur® J, sleeve bearing with flange, mm
|
Use our filter options to find the suitable product Tolerances and measurement systemThe installation dimensions and tolerances of iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods Assemblyiglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting in the correctly toleranced housing. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing are prevented this way.
iglidur® - assembling, gluing, machining
Certificates and standards