To ensure a flexible shore power supply for cruise ships at the terminal, the port of Rotterdam relies on the iMSPO Cruise.
The "movable socket" enables the rapid availability of a shore power connection for ships along the entire 230 metre length of the terminal. The construction includes a 230 metre long steel trough, which was placed in a one metre deep trench under the quay. In the trough, all cables for supplying power to the cruise ships run protected in energy chains of type 5050RHD. The rol e-chain moves the 12 CF-CRANE motor cables and various fibre optic and supply cables quickly to the docked ship. Thanks to the tight bend radius of the cables, space is saved under the quay. They supply the ships with a power output of up to 16MW at 11kV, enough to supply a small town with 15,000 to 20,000 inhabitants.
The iMSPO Cruise is moved by remote control in the fully covered trough with the sockets folded in. Once the connection position has been reached, the cover over the iMSPO is removed and the sockets are raised. The transfer vehicle can now be connected at this point and the ship supplied with power. The entire process can be completed by two people in less than 15 minutes. The iMSPO complies with the standards and machine guidelines of IEC 80005-1. In addition, the positioning of the system underground also increases safety in the harbour, as there are no cables or other equipment in the way on the quay.
Like the cruise terminal, the shore power system is cooled using water from the Meuse. A separate grid connection with renewable electricity was laid for the system over a length of 1.5 kilometres from the Maashaven to the Wilhelminakade. As the cruise ships' generators at the port of Rotterdam will be switched off in future, CO₂, nitrogen and particulate matter emissions in the port and city area will also be reduced, air quality will improve and ship noise will be a thing of the past.