My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

Bar stock - iglidur®

Wear problems are solved quickly and cost-effectively with a large selection of bar stock products from igus®. They are long-lasting and their shape can be adapted individually. Plastic bar stock products made of iglidur® material do not need any additional lubrication and are maintenance-free. They have been specially developed for dynamic applications, have low coefficients of friction and are very hard-wearing. This substantially lengthens the service life of your application. iglidur® bar stock products are available as round rods, tubes or plates of different lengths. Upon request, they can be machined if special shapes are needed. Depending on the application, different iglidur® materials with specific properties can be selected. For example, there are iglidur® plastic bar stock products that withstand temperatures up to +250 °C or have been certified for food and drinking-water applications.

Filter

Requirements

Number of products: 46

iglidur® HSD350, plate strips
  • Sterilisable
  • For continuous use up to +180°C
  • High media resistance
  • Corrosion-free
  • For wet environments
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® J4, plate strip
  • Low-cost material for large volume production
  • For a low coefficient of friction
  • Good media resistance
  • Low moisture absorption
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® A350, bar stock plates
  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     

461.10 USD/Pc.

12 items, thereof ready for shipping:
2 in 24 hours
10 in 7 - 10 working days
To the product page
iglidur® A350, round bar
  • For use with temperatures up to +180°C
  • Comply with FDA requirements
  • For medium to high loads
  • Equally good for both rotating and pivoting applications
  • Lubrication-free and maintenance-free
  •  Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
     

38.02 USD/m

14 items, thereof ready for shipping:
10 in 7 - 10 working days
To the product page
iglidur® F2, round bar
  • Used to prevent electrostatic charges
  • Also suitable for wet applications
  • Lubrication and maintenance-free

137.88 USD/m

2 items, thereof ready for shipping:
2 in 7 - 10 working days
To the product page
iglidur® H1, round bar
  • High wear resistance in extreme ambient conditions
  • Very low coefficients of friction
  • High resistance to temperature and chemicals
  • For underbonnet applications
  • Lubrication and maintenance-free

91.88 USD/m

7 items, thereof ready for shipping:
7 in 7 - 10 working days
To the product page
iglidur® J, round bar
  • Low wear against a lot of shaft materials
  • Low coefficients of friction during dry operation
  • Vibration dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low moisture absorption

10.30 USD/m

16 items, thereof ready for shipping:
15 in 7 - 10 working days
To the product page
iglidur® X, round bar
  • Continuous operating temperatures from -100 to +250 °C
  • Extremely high chemical resistance
  • Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength

82.19 USD/m

12 items, thereof ready for shipping:
12 in 7 - 10 working days
To the product page
iglidur® J, hollow bar
  • Low wear against different shaft materials
  • Low coefficients of friction in dry operation
  • Vibration-dampening
  • Good resistance to chemicals
  • Best performance with soft shaft materials
  • Low humidity absorption

Upon request

3 items, thereof ready for shipping:
3 in 7 - 10 working days
To the product page
iglidur® GLW, round bar
  • Low-cost material for mass production
  • Applications with static loads
  • Cost-effective
  • Dirt-resistant
  • Resistant to vibrations

40.77 USD/m

2 items, thereof ready for shipping:
2 in 7 - 10 working days
To the product page
iglidur® JB, round bar
  • Low wear
  • Low coefficient of friction
  • Low humidity absorption
  • Good media resistance

57.85 USD/m

5 items, thereof ready for shipping:
5 in 7 - 10 working days
To the product page
iglidur® JB, bar stock plates
  • Wear resistant
  • Low coefficient of friction
  • Low moisture absorption
  • Good media resistance

Upon request

6 items, thereof ready for shipping:
2 in 24 hours
4 in 7 - 10 working days
To the product page
iglidur® X, plate strips
  • Continuous operating temperatures from -100 to +250°C
  • Extremely high chemical resistance
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • High compressive strength
  • Choose the standard length of 1,000mm or have a length cut to size from 100mm
iglidur® J, bar stock plates
  • Low wear with different shaft materials
  • Low coefficient of friction during dry operation
  • Vibration-dampening
  • Good chemical resistance
  • For best performance with soft shaft materials
  • Low moisture absorption

35.60 USD/Pc.

38 items, thereof ready for shipping:
1 in 24 hours
30 in 7 - 10 working days
To the product page
iglidur® RN326, bar stock plates
  • Low humidity absorption
  • High temperature resistance
  • High chemical resistance
  • Corrosion-resistant
  • Available material thickness: 15mm
  • Lubrication- and maintenance-free

Consulting

Photo
Aw Kai Hua

Product Manager iglidur® bearings ASEAN

Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h