igusigus-icon-cart(0)

Gears & Racks online shop

In our gear shop you have the possibility to buy different plastic gears.
The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
Do you have questions about our gears or would you like technical support? We will be happy to advise you without obligation. Contact us here.

Number of products 22

iguform S270 gears, mm

iguform S270 gears, mm

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet.

Calculate the service life now. Click here

Please note: for gears with feather key groove: 
no alignment to the tooth profile.
(Possible upon request)

Not found the right geometry? Click here

MYR 8.74/Pc.Cost-effective price break available onlineMYR 2.64/Pc. 100 Pc.

573 variant(s), of which:

igus-icon-lieferzeit
313 Ready for shipment within 7-10 working days

igutek P360 gears, mm

igutek P360 gears, mm

  • Increased wear resistance
  • Good tribological specifications
  • Very tough.
  • Resistant to shock loads

Calculate the service life now. Click here


Please note: for gears with feather key groove: 
no alignment to the tooth profile.
(Possible upon request)


Not found the right geometry? Click here



MYR 10.10/Pc.Cost-effective price break available onlineMYR 3.39/Pc. 100 Pc.

574 variant(s), of which:

igus-icon-lieferzeit
312 Ready for shipment within 7-10 working days

iguform A270 gears, mm

iguform A270 gears, mm
  • FDA-compliant
  • EU 10/2011-compliant
  • Low coefficient of friction
  • Low humidity absorption
  • Low-noise

iguform S270 gear racks, mm

New
iguform S270 gear racks, mm
  • Low coefficient of friction
  • Low humidity absorption
  • Quiet


Calculate the service life now. Click here


Not found the right geometry? Click here

MYR 23.22/Pc.Cost-effective price break available onlineMYR 10.40/Pc. 100 Pc.

41 variant(s), of which:

igus-icon-lieferzeit
7 Ready for shipment within 7-10 working days

xirodur® B180, gear, mm

xirodur® B180, gear, mm

  • ​​​​​​Low coefficient of friction
  • Wear-resistant material for continuous operation
  • Vibration-dampening
  • Available in 3 hub designs

Matching gear racks available here

Not found the right geometry? Click here
MYR 43.57/Pc.Cost-effective price break available onlineMYR 24.27/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 24 - 48 hours

igutek P360 gear racks, mm

New
igutek P360 gear racks, mm
  • Increased wear resistance
  • Good tribological specifications
  • Very robust
  • Resistant to shock loads
MYR 26.83/Pc.Cost-effective price break available onlineMYR 12.29/Pc. 100 Pc.

9 variant(s), of which:

igus-icon-lieferzeit
7 Ready for shipment within 7-10 working days

iglidur® A500 gear, mm

iglidur® A500 gear, mm
iglidur® A500 | The endurance runner at higher temperatures in the food sector
 
  • Compliant with EU Regulation 10/2011 EC
  • FDA-compliant
  • Temperature-resistant from -100°C to +250°C
  • High chemical resistance
  • Lubrication and maintenance-free
  • Standard range from stock
 

iglidur® F, gear, mm

iglidur® F, gear, mm
  • Electrically conductive 
  • High compressive strength
  • Good temperature resistance
  • Available in 3 hub designs
Upon request

9 variant(s), of which:

igus-icon-lieferzeit
9 Delivery time on request

iguform S270 bevel gears - ratio 1:1

iguform S270 bevel gears - ratio 1:1
  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 10.10/Pc.Cost-effective price break available onlineMYR 3.39/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

igutek P360 bevel gears - ratio 1:1

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:1) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here
Not found the right geometry? Click here

MYR 11.01/Pc.Cost-effective price break available onlineMYR 3.85/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

iguform S270 bevel gears - transmission 1:1.5

iguform S270 bevel gears - transmission 1:1.5

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.


The axes of the bevel gears are perpendicular to each other.


The bevel gears listed here (1:1.5) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here
Not found the right geometry? Click here


MYR 33.62/Pc.Cost-effective price break available onlineMYR 15.90/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

igutek P360 bevel gears - transmission 1:1.5

igutek P360 bevel gears - transmission 1:1.5

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.


The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.

Calculate the service life now. Click here
Not found the right geometry? Click here


MYR 39.50/Pc.Cost-effective price break available onlineMYR 19.07/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

iguform S270 bevel gears - transmission 1:2

iguform S270 bevel gears - transmission 1:2

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.


The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:2) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 23.67/Pc.Cost-effective price break available onlineMYR 10.63/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 Ready for shipment within 7-10 working days

igutek P360 bevel gears - transmission 1:2

igutek P360 bevel gears - transmission 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:2) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here
Not found the right geometry? Click here



MYR 28.19/Pc.Cost-effective price break available onlineMYR 13.04/Pc. 100 Pc.

10 variant(s), of which:

igus-icon-lieferzeit
10 Ready for shipment within 7-10 working days

iguform S270 bevel gears - transmission 1:3

iguform S270 bevel gears - transmission 1:3

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.


The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:3) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 18.70/Pc.Cost-effective price break available onlineMYR 7.99/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

igutek P360 bevel gears - transmission 1:3

igutek P360 bevel gears - transmission 1:3

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:3) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 21.86/Pc.Cost-effective price break available onlineMYR 9.65/Pc. 100 Pc.

8 variant(s), of which:

igus-icon-lieferzeit
8 Ready for shipment within 7-10 working days

iguform S270 bevel gears - transmission 1:4

iguform S270 bevel gears - transmission 1:4

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:4) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 15.53/Pc.Cost-effective price break available onlineMYR 6.26/Pc. 100 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
6 Ready for shipment within 7-10 working days

igutek P360 bevel gears - transmission 1:4

igutek P360 bevel gears - transmission 1:4

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:4) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 18.70/Pc.Cost-effective price break available onlineMYR 7.99/Pc. 100 Pc.

6 variant(s), of which:

igus-icon-lieferzeit
5 Ready for shipment within 7-10 working days

iguform S270 bevel gears - transmission 1:5

iguform S270 bevel gears - transmission 1:5

  • Low coefficient of friction
  • Low humidity absorption
  • Quiet

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:5) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 15.53/Pc.Cost-effective price break available onlineMYR 6.26/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

igutek P360 bevel gears - transmission 1:5

igutek P360 bevel gears - transmission 1:5

  • Increased wear resistance
  • Good tribological specifications
  • Robust
  • Resistant to shock loads

Please note: to achieve the desired transmission ratio, two bevel gears must be ordered.

The axes of the bevel gears are perpendicular to each other.

The bevel gears listed here (1:5) can be combined with each other. Please ensure the same module is selected.


Calculate the service life now. Click here

Not found the right geometry? Click here

MYR 18.70/Pc.Cost-effective price break available onlineMYR 7.99/Pc. 100 Pc.

2 variant(s), of which:

igus-icon-lieferzeit
2 Ready for shipment within 7-10 working days

.

.

Shopping at igus®