My contact person
Select location

After selection of your ZIP code, we designate the relevant staff to attend to you at once.

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date. For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

iglidur® Q290, sleeve bearing, mm

  • Good wear resistance at roomtemperature
  • Suitable for high speeds
  • Very good coefficient of friction
  • Very resistant to edge pressures
  • Very resistant to impacts/shock
  • Very resistant to dirt and dust
  • Resistant to high loads (>60 N/mm²)
Product description
iglidur® Q290 | for moderate to high loads, especially on soft shafts
iglidur® Q290 shows outstanding service life in robust swivel applications, as they are frequently found in some agricultural machinery, especially on "soft" shafts (e.g. galvanised). The wear on the shafts is minimal.
 
Typical application areas
 
Agriculture
Construction machinery
 
You can find further applications here:
Industry solutions
 
 
When to use it?
  • If a long-lasting bearing is needed for rugged
    operating conditions (agricultural equipment, construction machinery, etc.)
    with moderate to high dynamic loads
    on "soft" shafts.
When not to use?
Use our filter options to find the suitable product
 
Tolerances and measurement system
The installation dimensions and tolerances of the iglidur® plain bearings are a function of the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are imperative. Plain bearings with low moisture absorption can be designed with a minimal amount of tolerance. For wall thickness, the rule is: The thicker the bearings are, the larger the tolerances must be.
Testing methods
 
Assembly
iglidur® bearings are press-fit bearings. The inner diameter adjusts only after press-fit in the proper housing bore with a recommended tolerance. The before press-fit oversized dimension can be up to 2% of the inner diameter. In this manner, the secure press-fitting of the bearing is achieved. Axial or radial shifts in the housing are also prevented.
iglidur® - assembling, gluing, machining
 
 
Certificates and standards
RoHS compliant
According to 2011/65/EU (RoHS 2)
Technical data
Accessories
Downloads

Consulting

Photo
Aw Kai Hua

Product Manager iglidur® bearings ASEAN

Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:

24h