iglidur® i6000 3D printing resin

If you use 3D printers from Asiga or Genera, the material profile for processing iglidur® i6000 is stored directly in the respective material databases. You can find the material profile for processing on Formlabs 3D printers under the "Downloads" tab on this page.

Food-safe 3D printing resin for wear-resistant parts without PTFE: iglidur® i6000

The new triboresin iglidur i6000 has been specially developed for contact with food. For wear-resistant components in white or blue with a high surface quality (roughness Ra = 0.8µm; Rz = 4.2µm). The resin achieves these low roughness values directly from the printer - without time-consuming post-processing. This leads to less adhesion on the surface and better cleaning of the components.

It is ideal for a wide range of applications in the food, packaging and pharmaceutical industries as well as laboratory automation.

Processing instructions: Since skin contact with the liquid resin must be avoided, personal protective equipment is absolutely necessary during processing. For better processing, the bottle with the resin should be shaken well before use.

When to use it?

• If a food-safe resin is required
• If a PTFE-free material is needed
• If a low coefficient of wear is relevant

When not to use it?

• For the production of gears (→ iglidur i4000)
• For fine components that do not need to be food-safe (→ iglidur i2000 or iglidur i3000)
• For ductile components

Please observe the complete processing instructions for iglidur i6000 resin in the "Downloads" tab.