My contact person
e-chains®, chainflex®, cables, harnessed systems readychain®

+603 7803 0618
dry-tech® bearing technology

+603 7803 0618
3D printing materials for maximum
service life in moving applications

Wear-resistant 3D printing materials

Wearing parts with considerably improved wear resistance compared to standard 3D printing materials are manufactured using special filaments and SLS powder from igus®. Further benefits at a glance:


Similar wear-resistant properties to classic injection moulded parts made of iglidur®

More than 30 years experience in the development of high-performance plastics for moving applications

Tested in the company's own laboratory

3D printing service - simple, fast & in as little as 24 hours


Sensationally strong in the test compared to machined and injection-moulded parts

Up to 50x higher abrasion resistance

Test parameters
Wear test pivoting

Surface pressure: 1MPa

Surface speed: 0.01m/s

Pivoting angle: 60°

Duration: 4 weeks

Shaft materials: Cf53 and 304 SS

Test result:
The pivot test shows that the abrasion resistance of the iglidur® filament is up to 50 times higher than the standard 3D printing materials (e.g. ABS).


Y = Wear rate [μm/km]
A= ABS printed B= iglidur® I180 printed C= iglidur® I170 printed D= iglidur® J260 printed E= iglidur® J260 injection-moulded


Online shop

Ready for delivery from 24h
Special filaments  
Special filaments: up to 50 times more abrasion resistant than standard materials

Excellent wear behaviour

Tested service life

Low coefficients of friction

For prototypes or small batch series

SLS plastic  
SLS plastic: three times more abrasion-resistant than standard materials

Wear-resistant and low coefficients of friction

Good mechanical properties

Detail accuracy with exact surfaces

Can be processed in a similar way to commercially available SLS materials.

More information on 3D print materials

New products in 2018  
News 2018

Tribo filaments for 3D printing

3D printing service  
3D printing service

Simply, fast & and with full cost transparency – allow us to print your 3D printed parts.

Test laboratory  

3D print filament impresses during tests with injection moulding quality

Injection moulding tools from the 3D printer  
3D-printed injection moulding tools

Cost-effective and custom-made components with 3D-printed injection moulding tools.

Selected application examples

Use in motorsport

When compared to a conventional solution, 3D printing was found to involve less work and to produce a more lightweight part.

Go to application

Special bearing

Thanks to the 3D printing solution, the high igus® quality was maintained even for a special design.

Go to application


I would be happy to answer your questions personally

Harry Bok

Bearings Central Malaysia

Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.